Key Specification
| Fixed service port | 8 x 10/100/1000BASE-T ports
4 x 1GE/10GE SFP+ ports |
Packet forwarding rate | 72 Mpps | |
| Switching capacity | 96 Gbps | Power supply | 1 x fixed power supply | |
| Fan | Fanless | Operating temperature | Installed in an enclosed cabinet: –40°C to +65°C
Installed in a ventilated cabinet: –40°C to +70°C Installed in a fan-equipped cabinet : –40°C to +75°C |
|
| IP rating | IP41 by default (supporting upgrade to IP55) | Unit dimensions (W x D x H) | 150 mm x 133 mm x 86 mm (5.91 in. x 5.24 in. x 3.39 in.) | |
| Unit weight | 1.49 kg (3.29 lbs) | Installation method | Desktop mounting, DIN rail mounting, and wall mounting | |
Specifications
Hardware Specifications
| Port Specifications | RG-IS5200-8GT4XS | RG-IS5200- 8GT4XS-DC | RG-IS5200-8GT4XS-UP-DC | RG-IS5200-24GT4XS-UP-DC |
| Fixed ports | 8×10/100/1000BASE-T ports
4 x 1GE/10GE SFP+ ports |
8 x 10/100/1000BASE-T ports
4 x 1GE/10GE SFP+ ports |
8 x 10/100/1000BASE-T ports, supporting PoE/PoE+/PoE++
4 x 1GE/10GE SFP+ ports |
24 x 10/100/1000BASE-T ports, supporting PoE/PoE+/PoE++
4 x 1GE/10GE SFP+ ports |
| Fixed management port | 1 x RJ45 console port | |||
| RS-485 Port | 1 x RS-485 port, supporting Modbus | |||
| DIDO | 1 x DI, 1 x DO | |||
| USB | 1 x USB 2.0 port | |||
| Port Specifications | PoE-REP |
| Fixed ports | 1 x 100/1000 BASE-T/LRE100-4 IN port, 1 x 10/100/1000BASE-T OUT port |
| System Specifications | RG-IS5200-8GT4XS | RG-IS5200- 8GT4XS-DC | RG-IS5200-8GT4XS-UP-DC | RG-IS5200-24GT4XS-UP-DC |
| Packet forwarding rate | 72Mpps | 72Mpps | 72Mpps | 96 Mpps |
| Switching capacity | 96 Gbps | 96 Gbps | 96 Gbps | 128 Gbps |
| CPU | Two-core CPU, ARM Cortex™ A55, each core with the clock speed of 1.0GHz | |||
| BootROM | 16 MB (2 flash chips for 1+1 boot redundancy) | |||
| Flash memory | 512 MB | |||
| Memory | 1GB DDR4 | |||
| Number of VSU members | 8 | |||
| System Specifications | PoE-REP |
| Switching capacity | 4Gbps |
| Dimensions and Weight | RG-IS5200-8GT4XS | RG-IS5200- 8GT4XS-DC | RG-IS5200-8GT4XS-UP-DC | RG-IS5200-24GT4XS-UP-DC |
| Unit dimensions (W x D x H) | 150mm x 133mm x 86mm | 442mm x 220mm x 43.6mm | ||
| Unit weight | 1.49kg | 1.5kg | 1.53kg | 2.85kg |
| installation method | Desktop mounting, DIN rail mounting, and wall mounting | Desktop mounting, rack mounting, and wall mounting | ||
| Dimensions and Weight | PoE-REP |
| Unit dimensions (W x D x H) | 35 mm x 35 mm x 187 mm (1.38 in. x 1.38 in. x 7.36 in., with waterproof plugs)
35 mm x 35 mm x 131 mm (1.38 in. x 1.38 in. x 5.16 in., without waterproof plugs) |
| Power supply and Consumption | RG-IS5200-8GT4XS | RG-IS5200- 8GT4XS-DC |
| Power Supply | 1 x fixed power supply | IPA60：60W(12V5A) or external DC power supply |
| Power connector type | Terminal block | |
| Power module redundancy | Not Supported | 1+1 redundancy |
| Power input | AC input：
● Rated voltage：100V~240V AC，50/60Hz ● Maximum voltage：90V~264V AC，50/60Hz ● Rated current：0.6A
HVDC input： ● Rated voltage：240V DC ● Maximum voltage：204V~288V DC ● Rated current：0.3A |
Dual redundant DC (DC1/DC2) input:
● Rated voltage: 12 V DC to 48 V DC ● Maximum voltage: 9.6 V DC to 60 V DC ● Rated current: 2 A to 0.5 A |
| Maximum power consumption | 110 V AC：16.7W
220 V AC：16.8W 240 V AC：16.8W |
12 V DC: 19.8W
48 V DC: 17.5W |
| Leakage current | ≤3.5mA | N/A |
| Energy saving | Energy Efficient Ethernet (EEE) | |
| Power supply and Consumption | RG-IS5200-8GT4XS-UP-DC | RG-IS5200-24GT4XS-UP-DC |
| Power Supply | IPA240-P: 240 W (56 V/4.4 A) or external DC power supply | IPA60: 60 W (12 V/5 A), IPA240-P: 240 W (56 V/4.4 A) or external DC power supply |
| Power connector type | Terminal block | |
| Power module redundancy | 1+1 redundancy | |
| Power input | Dual redundant DC (DC1/DC2) input:
● Rated voltage: 56 V DC ● Maximum voltage： PoE only: 48 V DC PoE/PoE+/PoE++: 54 V DC to 57 V DC ● Rated current: 10 A |
Dual redundant DC (DC1/DC2) input:
● Rated voltage: 56V DC or 12V DC PoE not supported: 12 V DC PoE only: 48 V DC PoE/PoE+/PoE++: 54 V DC to 57 V DC ● Maximum voltage: 9.6 V DC to 60 V DC ● Rated current: 10A (56V DC) or 3A (12V DC) |
| Maximum power consumption | 23.8W (Without PoE)
503.8W (full PoE load) |
12V DC input: 36.8W
56V DC input: ● 35.5W (Without PoE) ● 515.5W (full PoE load) |
| PoE port | Ports 1 to 8 support PoE/PoE+/PoE++ (IEEE802.3af/at/bt) power supply | Ports 1 to 24 support PoE/PoE+/PoE++ (IEEE802.3af/at/bt) power supply |
| PoE power cable pairs | Four pairs (1-2, 3-6, 4-5, and 7-8 pairs) | |
| PoE output power | PoE budget: 480 W
Maximum power output per PoE port: 15.4 W (PoE), 30 W (PoE+), 90 W (PoE++) Note: ● The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device. ● By default, the maximum PoE output power of the switch is 210 W. |
PoE budget: 480 W
Maximum power output per PoE port: 15.4 W (PoE), 30 W (PoE+), 90 W (PoE++) Note: ● The maximum number of powered devices supported by the switch is determined by the available power of the switch and the actual power consumption of each device. ● By default, the maximum PoE output power of the switch is 200 W. |
| PoE distance | PoE-REP not used: 100 m (328.08 ft.) PoE-REP used:Ports 1 to 4: 200 m (100 m [328.08 ft.] + 100 m [328.08 ft.] = 200 m [656.16 ft.])Maximum output power of PoE-REP: 60 W Ports 5 to 8: ● 200 m (100 m [328.08 ft.] + 100 m [328.08 ft.] = 200 m [656.16 ft.]). Maximum output power of PoE-REP: 60 W ● 400 m (300 m [984.25 ft.] + 100 m [328.08 ft.] = 400 m [1,312.33 ft.]) (Distance from RG-IS5200 to PoE-REP + Distance from PoE-REP to powered devices). Maximum output power of PoE-REP: 30 W |
PoE-REP not used: 100 m (328.08 ft.) PoE-REP used:Ports 1 to 20: 200 m (100 m [328.08 ft.] + 100 m [328.08 ft.] = 200 m [656.16 ft.])Maximum output power of PoE-REP: 60 W Ports 21 to 24: ● 200 m (100 m [328.08 ft.] + 100 m [328.08 ft.] = 200 m [656.16 ft.]). Maximum output power of PoE-REP: 60 W ● 400 m (300 m [984.25 ft.] + 100 m [328.08 ft.] = 400 m [1,312.33 ft.]) (Distance from RG-IS5200 to PoE-REP + Distance from PoE-REP to powered devices). Maximum output power of PoE-REP: 30 W |
| Energy saving | Energy Efficient Ethernet (EEE) | |
| Power supply and Consumption | PoE-REP |
| PoE Powered (Input) | Support PoE/PoE+/PoE++ (IEEE802.3af/at/bt) |
| PoE power (output) | Support PoE/PoE+/PoE++ (IEEE802.3af/at/bt) (limited to 100 m) |
| Environment and Reliability | RG-IS5200-8GT4XS | RG-IS5200- 8GT4XS-DC | RG-IS5200-8GT4XS-UP-DC | RG-IS5200-24GT4XS-UP-DC |
| Operating temperature | Operating temperature: (at an altitude below 1,800 m [5,905.51 ft.], with industrial optical transceivers installed)
● –40°C to +65°C (–40°F to +149°F) (installed in an enclosed cabinet) ● –40°C to +70°C (–40°F to +158°F) (installed in a ventilated cabinet with a minimum air velocity of 80 Line Feet Minute [LFM]) ● –40°C to +75°C (–40°F to +167°F) (installed in a fan-equipped cabinet with a minimum air velocity of 200 LFM) Note: At an altitude between 1,800 m (5,905.51 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).
Storage temperature: –40°C to +85°C (–40℉ to +185℉) |
Operating temperature: (at an altitude below 1,800 m [5,905.51 ft.], with industrial optical transceivers installed)
● –40°C to +60°C (–40°F to +140°F) (installed in an enclosed cabinet) ● –40°C to +70°C (–40°F to +158°F) (installed in a ventilated cabinet with a minimum air velocity of 80 Line Feet Minute [LFM]) ● –40°C to +75°C (–40°F to +167°F) (installed in a fan-equipped cabinet with a minimum air velocity of 200 LFM) Note: At an altitude between 1,800 m (5,905.51 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).
Storage temperature: –40°C to +85°C (–40℉ to +185℉) |
Operating temperature: (at an altitude below 1,800 m [5,905.51 ft.], with industrial optical transceivers installed)
● –40°C to +65°C (–40°F to +149°F) (installed in an enclosed cabinet) ● –40°C to +70°C (–40°F to +158°F) (installed in a ventilated cabinet with a minimum air velocity of 80 Line Feet Minute [LFM]) ● –40°C to +75°C (–40°F to +167°F) (installed in a fan-equipped cabinet with a minimum air velocity of 200 LFM) Note: At an altitude between 1,800 m (5,905.51 ft.) and 5,000 m (16,404.20 ft.), every time the altitude increases by 220 m (721.78 ft.), the maximum temperature decreases by 1°C (1.8°F).
Storage temperature: –40°C to +85°C (–40℉ to +185℉) |
|
| Humidity | Operating humidity: 5% to 95% RH, Non-condensing
Storage humidity: 5% to 95% RH |
|||
| Altitude | Storage altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.)
Operating altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.) |
|||
| Mean time between failures (MTBF) | Below 40°C (104°F): at least 300,000 hours (about 34 years) | |||
| Fan | Fanless design, natural cooling | |||
| Temperature monitoring | Temperature monitoring, over-temperature alarming
If the ambient temperature exceeds a certain value, the device will be reset. |
|||
| IP rating | IP41 by default. When the IS52-shield protection enclosure is installed, the IP rating reaches IP55.
Note: Without any protection enclosure, the front panel of the switch should not be installed upward to meet the IP41 protection requirements. |
IP40
Note: For bare metal servers, the front panel port should not be installed upward to meet IP40 requirements. |
||
| ESD | ESD contact/air discharge: 6 kV/8 kV
ESD susceptibility contact/air discharge: 8 kV/15 kV |
|||
| Surge protection | AC power port：
Common mode: 6 kV/Differential mode: 6 kV, 1.2/50, criterion B
Service ports: ● Common mode: 10 kV (1.2/50), criterion R ● Common mode: 6 kV (1.2/50), criterion B ● Differential mode: 500 V (between positive and negative ends, 1.2/50, criterion R)
DI/DO/RS-485 port: ● Common mode: 4 kV (1.2/50), criterion B ● Differential mode: 1 kV (1.2/50), criterion B |
AC power port (power adapter)：
Common mode: 6 kV/Differential mode: 6 kV, 1.2/50, criterion B
Service ports: ● Common mode: 10 kV (1.2/50), criterion R ● Common mode: 6 kV (1.2/50), criterion B ● Differential mode: 500 V (between positive and negative ends, 1.2/50, criterion R)
DI/DO/RS-485 port: ● Common mode: 4 kV (1.2/50), criterion B ● Differential mode: 1 kV (1.2/50), criterion B |
||
| Conducted immunity | Performance criterion: A
Spectrum scanning range: 0.15 MHz to 80 MHz Modulation: 80% AM, 1 kHz sine wave
AC power port: 3 V Service port: 3 V DI/DO/RS-485 port: 3 V |
Performance criterion: A
Spectrum scanning range: 0.15 MHz to 80 MHz Modulation: 80% AM, 1 kHz sine wave
AC power port: 3 V Service port: 3 V DI/DO/RS-485 port: 3 V |
||
| Power frequency magnetic field immunity | Continuous magnetic field: 30 A/m
Short-term magnetic field: 300 A/m |
|||
| Voltage dip | AC power port：
● 70% voltage remained for 25 cycles (criterion B). ● 0% voltage remained for 0.5 cycle (criterion B). ● 0% voltage remained for 1 cycle (criterion B). ● 0% voltage remained for 250 cycles (criterion C) |
AC power port (power adapter):
● 70% voltage remained for 25 cycles (criterion B). ● 0% voltage remained for 0.5 cycle (criterion B). ● 0% voltage remained for 1 cycle (criterion B). ● 0% voltage remained for 250 cycles (criterion C) |
||
| Vibration | Based on IEC 61000-3-2 and GB 17625.1, the switch meets the requirements of category A equipment. | |||
| Shock | IEC61000-3-3，GB17625.2
European Limits |
|||
| Environment and Reliability | PoE-REP |
| Operating temperature | Operating temperature:
–40°C to +65°C (–40°F to +149°F) (installed in an enclosed cabinet) ● –40°C to +65°C (–40°F to +149°F) (installed in an enclosed cabinet) ● –40°C to +70°C (–40°F to +158°F) (installed in a ventilated cabinet with a minimum air velocity of 80 Line Feet Minute [LFM]) ● –40°C to +75°C (–40°F to +167°F) (installed in a fan-equipped cabinet with a minimum air velocity of 200 LFM) Storage temperature: –40°C to +85°C (–40℉ to +185℉) |
| Humidity | Operating humidity: 5% to 90% RH
Storage humidity: 5% to 95% RH |
| IP rating | IP56 (standard waterproof cap) |
| Surge protection | 10 kV |
| Environment and Reliability | RG-IS5200-8GT4XS | RG-IS5200- 8GT4XS-DC | RG-IS5200-8GT4XS-UP-DC | RG-IS5200-24GT4XS-UP-DC |
| Safety regulation | EN 62368-1, BS EN 62368-1, IEC 62368-1 | |||
| EMC regulation | EN 55032, EN 55035, EN 300386, BS EN 55032, BS EN 55035 | |||
Software Specifications
Performance and Capacity
| Performance and Capacity | RG-IS5200 Series |
| Maximum number of VSU members | 8 |
| VSU bandwidth | 40 Gbps |
| Maximum number of SVIs | 990 |
| Maximum number of MAC address entries |
16000 |
| Maximum number of ARP address entries |
4000 |
| Maximum number of ND entries | 4000 |
| Maximum number of IPv4 unicast routes |
6000 |
| Maximum number of IPv6 unicast routes |
2000 |
| Maximum number of IPv4 multicast routes |
1000 |
| Maximum number of IPv6 multicast routes |
750 |
| Maximum number of IGMP groups | 1000 |
| Maximum number of MLD groups | 2000 |
| Maximum number of VRF instances | 255 |
| Maximum number of ACEs | In: 1750, Out: 800 |
Function
| Feature | RG-IS5200 Series |
| Ethernet switching | Jumbo frame (maximum length: 9,216 bytes) |
| IEEE 802.3az EEE | |
| IEEE 802.1Q (4K VLANs) | |
| Voice VLAN | |
| Super-VLAN and private VLAN | |
| MAC address-based VLAN, interface-based VLAN, protocol-based VLAN, and IP subnet-based VLAN | |
| GVRP | |
| Basic QinQ
Selective QinQ |
|
| STP, RSTP, and MSTP | |
| ERPS (G.8032) | |
| LLDP/LLDP-MED | |
| IP service | ARP |
| DHCP client, DHCP relay, and DHCP server | |
| DHCP snooping | |
| DNS | |
| DHCPv6 client, DHCPv6 relay, and DHCPv6 server | |
| DHCPv6 snooping | |
| ND and ND snooping | |
| IP routing | Static routing |
| RIP and RIPng | |
| OSPFv2 and OSPFv3 | |
| ACL and QoS | Standard IP ACLs
Extended IP ACLs Extended MAC ACLs Time-based ACLs Expert-level ACLs ACL80 |
| ACL redirection | |
| Traffic rate limiting on an interface | |
| Congestion management: RR, SP, WRR, DRR, WFQ, SP+WRR, SP+DRR, and SP+WFQ | |
| Congestion prevention: tail drop | |
| 802.1p/DSCP/ToS traffic classification
Eight priority queues per interface |
|
| Security | Multiple AAA modes |
| RADIUS and TACACS+
TACAS+ |
|
| Interface-based and MAC address-based 802.1X authentication | |
| Web authentication | |
| HTTPS | |
| SSHv1 and SSHv2 | |
| Global IP-MAC binding | |
| Port isolation and port security | |
| IP source guard | |
| CPP and NFPP | |
| Reliability | REUP, RLDP, and DLDP |
| IPv4 VRRP v2/v3 and IPv6 VRRP | |
| BFD | |
| Link tracing, fault notification, and remote loopback based on 802.3ah (EFM) | |
| Dual-boot redundancy | |
| Fan speed adjustment
Fan fault alarming |
|
| Virtualization | VSU |
| Network management and monitoring | SPAN, RSPAN |
| sFlow | |
| NTP and SNTP | |
| FTP and TFTP | |
| SNMPv1/v2/v3 | |
| RMON (groups 1, 2, 3, and 9) | |
| CWMP (TR-069) | |
| gRPC |
Order Information
Switches and Power Modules
Order switches, expansion modules, power modules, and other components as needed. Before ordering an expansion module or power supply module, please contact our online customer service team for the latest support information about the modules.
| Model | Description |
| RG-IS5200-8GT4XS | 8 x 10/100/1000BASE-T ports, 4 x 1GE/10GE SFP+ ports
Built-in AC power supply, single AC power input, fanless design, IP41 (supporting upgrade to IP55), DIN rail mounting |
| RG-IS5200-
8GT4XS-DC |
8 x 10/100/1000BASE-T ports, 4 x 1GE/10GE SFP+ ports
Dual DC power supplies, supporting 60 W power input through the IPA60 power adapter, fanless design, IP41 (supporting upgrade to IP55), DIN rail mounting |
| RG-IS5200-
8GT4XS-UP-DC |
8 x 10/100/1000BASE-T ports, PoE/PoE+/PoE++ power supply, 4 x 1GE/10GE SFP+ ports
Dual DC power supplies, supporting 240 W power input through the IPA240-P power adapter, fanless design, IP41 (supporting upgrade to IP55), DIN rail mounting The first 4 Ethernet ports can be connected to PoE-REP, with a transmission rate of 1000M/100M/10M over a maximum transmission distance of 200 m (656.17 ft.). The last 4 Ethernet ports can be connected to PoE-REP, with a transmission rate of 1000M/100/10M over a maximum transmission distance of 200 m (656.17 ft.), or of 100M over a maximum transmission distance of 400 m (1,312.34 ft.). |
| RG-IS5200-
24GT4XS-UP-DC |
24 x 10/100/1000BASE-T ports, PoE/PoE+/PoE++, 4 x 1GE/10GE SFP+ ports
Dual DC power supplies, supporting 60 W power input (without PoE) through the IPA60 power adapter or 240 W power input (with PoE) through the IPA240-P power adapter, fanless design, IP40, mounting in a 19-inch rack The first 20 Ethernet ports can be connected to PoE-REP, with a transmission rate of 1000M/100M/10M over a maximum transmission distance of 200 m (656.17 ft.). The last 4 Ethernet ports can be connected to PoE-REP, with a transmission rate of 1000M/100M/10M over a maximum transmission distance of 200 m (656.17 ft.), or of 100M over a maximum transmission distance of 400 m (1,312.34 ft.). |
| IPA240-P | 240 W AC PoE power module, applicable to RG-IS5200-8GT4XS-UP-DC and RG-IS5200-24GT4XS-UP-DC (PoE scenarios), supporting 1:1 hot standby (not simultaneous power supply), IP40, DIN rail mounting |
| IPA60 | 60 W AC power module, applicable to RG-IS5200-8GT4XS-DC and RG-IS5200-24GT4XS-UP-DC (non-PoE scenarios), supporting 1:1 hot standby (not simultaneous power supply), IP40, DIN rail mounting |
Accessories
| Model | Description |
| PoE-REP | PoE repeater. The IN port supports 100/1000BASE-T and LRE100-4. The OUT port supports 10/100/1000BASE-T.
The IN port supports PoE++ (PD Class 8) input while the OUT port supports PoE++ output and IP56 |
| IS52-shield | IP55 protective enclosure, applicable to RG-IS5200-8GT4XS, RG-IS5200-8GT4XS-DC, and RG-IS5200-8GT4XS-UP-DC |
Optical Transceivers and Cables
1GE
| Model | Description |
| GE-SFP-SR-MM850-I | 1000BASE-SR, industrial SFP transceiver, 850 nm, Duplex LC, 550 m over MMF |
| GE-SFP-LR-SM1310-I | 1000BASE-LR, industrial SFP transceiver, 1310 nm, Duplex LC, 10 km over SMF |
10GE
| Model | Description |
| XG-SFP-SR-MM850-I | 10GBASE-SR，Industrial SFP+ transceiver, 850nm, Duplex LC, 300 m over MMF |
| XG-SFP-LR-SM1310-I | 10GBASE-LR，Industrial SFP+ transceiver, 1310nm, Duplex LC, 10 km over SMF |